Rights when bathroom remodel before and after this goes back it sticks out too far the manganese takes out too far from the wall so every an extension for the half inch galvanized pipe a couple elbows and sent it over to the web’s about five inches and then for the drainpipe I put a a ninety degree bent elbow did some more cutting so they’ve kind of worked it goes back quite a bit but there’s still about a three inch gap so I’m going to cut into here which will allow the vanity to go all the way back against the wall or metempsychoses.
I got the shower done turned out pretty nice looks really good on the tile they’re measurements we’re good turned out just how I wanted them to use some black caulk black silicone to waterproof this plus Allen is just a little bit darker black to stand get the light in got that aloes for bucks well today I worked on the door and the cabinets so we just decided Togo get a new door you know for only bucks it was the right thing to do i twas a little bit outdated heavier so Igor some brushed nickel hinges and doorknob to go with the rest of the brushed nickel things in there we painted it and then I hung the door had to do some extra.
sanding though so we’ll come backhand touch this up here’s the shelves that I built and there’s there’s some shelves that are going to go in here need to drill some holes for adjustable shelves for these cabinets this one up here is really not even a shelf it’s more just apace where the rope light is going to look nice and cast some light outward these will have adjustable shelves Howells next.
I’m going to put the door trim on and I just got some molding from Lowe’s put the door trim so it just needs to be touched up in a few places Just put a little extra cult where I may have nicked some stuff for example inhere I had to cut that out for the doorjamb and then I just filled it in with caulk where I I went a little bit too far I had a couple of the little accent sin place already.
They’re pretty adjustable for any size never done this before either but looks pretty straightforward and then this little light cover basically goes in there to give it a nice white and black accent here are some of the supplies that I bought the rest of the electrical project some. Read more @ www.bestbathroomremodelingnj.com
Romex was okay so electrical boxes for the outlet electrical box for the switches these are the switches they’re against kind of two two switches in one so two of those are black and then the black I ‘ll let’s wire crimpers the little twisty thing and then it’s not grounded in here.
But I thought what I could do I ‘m guessing is run a ground wire to this sewer pipe I get I scraped this down to the bare metal attach this band to it and then attach a ground wire to that then we’ll have a grounding source there’s a GFCI here already in place shoot I forgot to get a black one well.
I’ll use that for now maybe I’ll replace it with a black one later but it’s a nice GFCI plug in somebody put in but no ground there just a hot and a neutral wire if I can ground it then I can use that GFCIappropriately as well as having and grounding source for all the other now.
Let’s in the bathroom which of course is very unsafe not to have them grounded so anyway in that today’s biggest goal is to get all the wiring done so some of it I’ve done before some of it I never have but just reading instructions and using common sense.
So wish me luck as far as my tools for demolition really the hammer had a bigger hammer than this I have a framers hammer but I broke it yesterday after years of service it finally gave out crowbar if you’re going to do this probably get a larger crowbar Bathroom Remodeling Service.
Have a difficult time selling the property because they have created something in their bathroom that people just don’t like or they can’t can’t deal with so that’s the only reason why I ‘m throwing tip number four in here How to Remodeling a Bathroom.
I’m not suggesting that you don’t try and get a little creative with some great colors you could really make a nice bathroom out of it and if you’re going to be living in that house for the rest of your life and you know that then do what you want tip number five moving fixtures can be expensive I can’t tell you how many times.
I would go over to someone’s house and they would say hey can I move my toilet over three inches or can I move my toilet over to where the bathtub is and switch locations well you can it’s just going to cost a lot of money moving a toilet on a concrete slab will require somebody to remove the concrete.
It will need to be jack-hammered and then the dirt will need to be removed and then, of course, the plumbing will need to be reconfigured and the same thing on a wood-framed floor if you have a subfloor or a Florida basement.
Where you have floor joist and subflooring then you might need to plan on locating relocating the fixtures into areas where you are not going to be in the way of a structural component like a floor joist’s not uncommon to have a floor joist running right down the center.
Where you would like to move something to so then, of course, this might require some type of structural engineering this is not going to be cheap and can add a considerable cost to your project tip number six and this is another biggie another problem that designers have.